Serene Valley Sink Protector Grid 26-1/16″ x 14-1/16″, Centered Drain with Corner Radius 3-1/2″, 304 Stainless Steel Material NLW2614C

Product description

Serene Valley Brand aims to making a kitchen grid to be a beautiful addition to your kitchen without compromises. We use the 1/4”diameter 304 stainless steel for the outer wire and 1/8″ for inner wire, which is thicker than most of competitors. Our tighter grid structure and unmatched laser welding technique all make it stand out from the crowd. A good product speaks for itself. Once you have it in hand, you can feel the quality and have no regret for the purchase.

How to Measure Your Sink to Find the Matching Grid?

Where The Grid Sits?

Our sink protector have 1″ height, which means it sits at the plane about 1″ above the sink bottom. Therefore, it’s VERY important to measure the dimension of your sink bottom at 1″ height.

Sink Bottom Length

Measure carefully from left to right at the plane about 1″ above the sink bottom. Please make sure the length of the grid of your choice has about 1/2″ less than your measurement, which is to avoid the grid edge touching your sink.

Sink Bottom Width

Measure carefully from top down at the plane about 1″ above the sink bottom. Please make sure the width of the grid of your choice has about 1/2″ less than your measurement, which is to avoid the grid edge touching your sink.

Kitchen sink, in general, have three types of drain location: centered drain, rear drain and side drain (or side corner drain). Please make sure the grid of your choice have the same drain location as the grid you choose.

Kitchen sinks have different corner radius. Please make sure the grid of your choice have the same corner radius as the grid you choose.

DESIGNED TO SIT AT THE BOTTOM OF YOUR KITCHEN SINK. PLEASE MEASURE THE BOTTOM OF YOUR SINK as we showed in the diagram. Sink bottom length and width should be about 1/2″ more than the grid’s length and width to give room for the grid easily in and out of your sink. If you are not sure how to measure your sink to match our grid, please contact us by email or message, we will respond to you in 12 hrs to help you.
Grid dimension: 26-1/16″ X 14-1/16″ for your sink bottom with Corner Radius 3-1/2″.
Center Drain LOCATION.
304 Premium stainless steel construction with light weight design to ensure durability and user-friendliness at the same time.
Please refer to the video shown at the bottom of the product picture display for more detailed info on measuring your sink to fit our grid. This info is VERY important and could save you a lot of time if ordering a wrong grid can be avoided.